Chapter 10 Interface

Table 52 Network > Interface > VLAN (continued)

LABEL

DESCRIPTION

Port/VID

For VLAN interfaces, this field displays

 

• the Ethernet interface on which the VLAN interface is created

 

• the VLAN ID

 

For virtual interfaces, this field is blank.

 

 

IP Address

This field displays the current IP address of the interface. If the IP address is

 

0.0.0.0, the interface does not have an IP address yet.

 

This screen also shows whether the IP address is a static IP address (STATIC)

 

or dynamically assigned (DHCP). IP addresses are always static in virtual

 

interfaces.

 

 

Mask

This field displays the interface’s subnet mask in dot decimal notation.

 

 

Add icon

This column lets you create, edit, remove, activate, and deactivate interfaces.

 

To create a VLAN interface, click the Add icon at the top of the column. The

 

VLAN Add/Edit screen appears.

 

To create a virtual VLAN interface, click the Add icon next to the corresponding

 

VLAN interface. The Virtual Interface Add/Edit screen appears. See Section

 

10.8 on page 217.

 

To edit an interface, click the Edit icon next to it. The VLAN Add/Edit screen or

 

Virtual Interface Add/Edit screen appears accordingly.

 

To remove an interface, click the Remove icon next to it. The ZyWALL confirms

 

you want to remove it before doing so.

 

To activate or deactivate an interface, click the Active icon next to it. Make sure

 

you click Apply to save and apply the change.

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

10.4.4 VLAN Add/Edit

This screen lets you configure IP address assignment, interface bandwidth parameters, DHCP settings, and ping check for each VLAN interface. To access this screen, click the Add icon at the top of the Add column or click an Edit icon next to a VLAN interface in the VLAN Summary screen. The following screen appears.

 

199

ZyWALL USG 1000 User’s Guide