Chapter 44 Service Control
44.14 Configuring Vantage CNM
Vantage CNM is disabled on the device by default. Click System > Vantage CNM to configure your device’s Vantage CNM settings.
Figure 456 System > Vantage CNM
The following table describes the labels in this screen.
Table 214 System > Vantage CNM
LABEL | DESCRIPTION |
Enable | Select this check box to allow Vantage CNM to manage your ZyWALL. |
|
|
Server IP Address/ | Enter the IP address or fully qualified domain name of the Vantage server. |
FQDN | If the Vantage CNM server is on a different subnet to the ZyWALL and is |
| behind a NAT router, enter the WAN IP address of the NAT router here and |
| configure the NAT router to forward UDP port 11864 traffic to the Vantage |
| CNM server. |
| If the Vantage CNM server is behind a firewall, you may have to create a rule |
| on the firewall to allow UDP port 11864 traffic through to the Vantage CNM |
| server (most (new) ZyXEL firewalls automatically allow this). |
|
|
Transfer Protocol | Select whether the Vantage CNM sessions should use regular HTTP |
| connections or secure HTTPS connections. |
| Note: HTTPS is recommended. |
| The Vantage CNM server must use the same setting. |
|
|
Device Management | Select Auto to have the ZyWALL allow Vantage CNM sessions to connect to |
IP | any of the ZyWALL’s IP addresses. |
| Select Custom to specify the ZyWALL’s IP address that allows Vantage CNM |
| sessions. Configure the Custom IP field if you select this. You might for |
| example need to specify the IP address when using a WAN trunk that uses |
| multiple WAN IP addresses. |
|
|
Custom IP | Specify the ZyWALL’s IP address that allows Vantage CNM sessions. This |
| field applies when you select Custom in the Device Management IP field. |
|
|
Keepalive Interval | Set how often the ZyWALL sends a keep alive packet to the Vantage CNM |
| server if there is no other traffic. The keep alive packets maintain the Vantage |
| CNM server’s control session. |
|
|
Periodic Inform | Select this option to have the ZyWALL periodically send “Inform” messages to |
Interval | the Vantage CNM server. |
|
|
| 611 |
ZyWALL USG 1000 User’s Guide | |
|
|