|
| Chapter 10 Interface |
| Table 48 Network > Interface > Interface Summary (continued) | |
| LABEL | DESCRIPTION |
| Status | This field displays the current status of each interface. The possible values depend |
|
| on what type of interface it is. |
|
| For port groups: |
|
| Inactive - The port group is disabled. |
|
| Port Group Down - The port group is enabled but not connected. |
|
| Port Group Up - The port group is enabled, and at least one of the physical ports |
|
| associated with it is connected. |
|
| For Ethernet interfaces: |
|
| Port Group Inactive - The Ethernet interface does not have any physical ports |
|
| associated with it. |
|
| Inactive - The Ethernet interface is disabled. |
|
| Down - The Ethernet interface is enabled but not connected. |
|
| Speed / Duplex - The Ethernet interface is enabled and connected. This field |
|
| displays the port speed and duplex setting (Full or Half). |
|
| For the auxiliary interface: |
|
| Inactive - The auxiliary interface is disabled. |
|
| Connected - The auxiliary interface is enabled and connected. |
|
| Disconnected - The auxiliary interface is not connected. |
|
| For virtual interfaces, this field always displays Up. If the virtual interface is |
|
| disabled, it does not appear in the list. |
|
| For VLAN and bridge interfaces, this field always displays Up. If the VLAN or bridge |
|
| interface is disabled, it does not appear in the list. |
|
| For PPPoE/PPTP interfaces: |
|
| Connected - The PPPoE/PPTP interface is connected. |
|
| Disconnected - The PPPoE/PPTP interface is not connected. |
|
| If the PPPoE/PPTP interface is disabled, it does not appear in the list. |
|
|
|
| HA Status | This field displays the status of the interface in the virtual router. |
|
| Active - This interface is the master interface in the virtual router. |
|
| |
|
| Fault - This VRRP group is not functioning in the virtual router right now. For |
|
| example, this might happen if the interface is down. |
|
| n/a - Device HA is not active on the interface. |
|
|
|
| Zone | This field displays the zone to which the interface is currently assigned. |
|
|
|
| IP Addr/Netmask | This field displays the current IP address and subnet mask assigned to the |
|
| interface. If the IP address and subnet mask are 0.0.0.0, the interface is disabled or |
|
| did not receive an IP address and subnet mask via DHCP. |
|
| If this interface is a member of an active virtual router, this field displays the IP |
|
| address it is currently using. This is either the static IP address of the interface (if it |
|
| is the master) or the management IP address (if it is a backup). |
|
|
|
| IP Assignment | This field displays how the interface gets its IP address. |
|
| Static - This interface has a static IP address. |
|
| DHCP Client - This interface gets its IP address from a DHCP server. |
|
| Dynamic - This is the auxiliary interface. |
|
|
|
| Services | This field lists which services the interface provides to the network. Examples |
|
| include DHCP relay, DHCP server, DDNS, RIP, and OSPF. This field displays n/a |
|
| if the interface does not provide any services to the network. |
|
|
|
| Renew/Dial | Use this field to get or to update the IP address for the interface. Click Renew to |
|
| send a new DHCP request to a DHCP server. Click the Connect icon to try to |
|
| connect the auxiliary interface or a PPPoE/PPTP interface. If the interface cannot |
|
| use one of these ways to get or to update its IP address, this field displays n/a. |
|
|
|
| 187 |
ZyWALL USG 1000 User’s Guide | |
|
|