Chapter 13 Routing Protocols
2Set up the OSPF areas.
3Configure the appropriate interfaces. See Section 10.2.1 on page 184.
4Set up virtual links, as needed.
13.4OSPF Screens
The OSPF screens are used to specify the ID the ZyWALL uses in the OSPF AS and to maintain the policies for redistribution. In addition, they are also used to create, maintain, and remove OSPF areas.
13.4.1 OSPF Summary
The OSPF screen is used to specify the OSPF router and maintain the policies for redistribution. In addition, it provides a summary of OSPF areas, allows you to remove them, and opens the OSPF Add/Edit screen to add or edit them.
To access this screen, login to the web configurator. When the main screen appears, click once on Network > Routing >OSPF to open the following screen.
Figure 158 Network > Routing > OSPF
The following table describes the labels in this screen. See Section 13.4.2 on page 242 for more information as well.
Table 73 Network > Routing Protocol > OSPF
LABELDESCRIPTION
OSPF Router ID Select the
Default - the highest available IP address assigned to the interfaces is the ZyWALL’s ID.
User Define - enter the ID (in IP address format) in the field that appears when you select User Define.
Redistribute
| 241 |
ZyWALL USG 1000 User’s Guide | |
|
|