Chapter 4 Wizard Setup

You can click Next and use the following screen to perform a basic registration (see Section

4.4on page 91). If you want to do a more detailed registration or manage your account details, click myZyXEL.com.

Alternatively, click Close to exit the wizard.

4.3.4 PPPoE: Auto IP Address Assignment

If you select Auto as the IP Address Assignment in the previous screen, the following screen displays after you click Next.

Figure 20 PPPoE Encapsulation: Auto

The following table describes the labels in this screen.

Table 9 PPPoE Encapsulation: Auto

LABEL

DESCRIPTION

ISP Parameters

 

 

 

Encapsulation

This displays the type of Internet connection you are configuring.

 

 

Service Name

Type the PPPoE service name given to you by your ISP. PPPoE uses a service

 

name to identify and reach the PPPoE server. You can use alphanumeric and -

 

_@$./ characters, and it can be up to 64 characters long.

User Name

Type the user name given to you by your ISP. You can use alphanumeric and -

 

_@$./ characters, and it can be up to 31 characters long.

Password

Type the password associated with the user name above. Use up to 64 ASCII

 

characters except the [] and ?. This field can be blank.

 

 

Retype to

Type your password again for confirmation.

Confirm

 

 

 

Nailed-Up

Select Nailed-Upif you do not want the connection to time out.

 

 

 

81

ZyWALL USG 1000 User’s Guide