Chapter 10 Interface

Table 50 Network > Interface > Ethernet > Edit (continued)

LABEL

DESCRIPTION

Edit static DHCP

Click this if you want the ZyWALL to assign static IP addresses to computers.

table

The Static DHCP screen appears.

 

Figure 126 Network > Interface > Ethernet > Edit > Edit static DHCP

 

table

 

 

 

 

The ZyWALL checks this table when it assigns IP addresses. If the computer’s

 

MAC address is in the table, the ZyWALL assigns the corresponding IP

 

address. Otherwise, the ZyWALL assigns the IP address dynamically using the

 

IP Pool Start Address and Pool Size.

 

Note: You must click OK in the Static DHCP screen and then

 

click OK in this screen to save your changes.

Ping Check

The interface can regularly ping the gateway you specified to make sure it is still

 

available. You specify how often the interface pings the gateway, how long to

 

wait for a response before the attempt is a failure, and how many consecutive

 

failures are required before the ZyWALL stops routing to the gateway. The

 

ZyWALL resumes routing to the gateway the first time the gateway

 

acknowledges the ping.

 

 

 

Enable

Select this to enable the ping check.

 

 

 

Check Period

Enter the number of seconds between ping attempts.

 

 

 

Check Timeout

Enter the number of seconds to wait for a response before the attempt is a

 

failure.

 

 

 

Check Fail

Enter the number of consecutive failures before the ZyWALL stops routing

Tolerance

through the gateway.

 

 

 

Ping Default

Select this to ping the default gateway.

Gateway

 

 

 

 

 

Ping this

Select this to ping a specified domain name or IP address. Enter that domain

address

name or IP address in the field next to it.

10.3 Port Grouping

This section introduces port groups and then explains the screen for port groups.

10.3.1 Port Grouping Overview

Use port grouping to create port groups and to assign physical ports and port groups to Ethernet interfaces.

194

 

ZyWALL USG 1000 User’s Guide