Chapter 5 Configuration Basics

Figure 43 Interfaces and Zones: Example

•The LAN zone contains the ge1 (Gigabit Ethernet 1) interface. This is a protected zone and uses private IP addresses. ge1 uses 192.168.1.1 and the connected devices use IP addresses in the 192.168.1.2 to 192.168.1.254 range.

•The WAN zone contains interfaces ge2 and ge3. They use public IP addresses to connect to the Internet.

•The DMZ zone contains interface ge4. The DMZ zone has servers that are available to the public. ge4 uses private IP address 192.168.3.1 and the connected devices use private IP addresses in the 192.168.3.2 to 192.168.3.254 range.

•The DMZ-2 zone contains interface ge5 and has servers that are available to the public. ge5 and the connected servers use public IP addresses.

This example is also used in several examples in Section 5.4 on page 114.

5.4 Feature Configuration Overview

This section provides information about configuring the main features in the ZyWALL. The features are listed in the same sequence as the menu item(s) in the web configurator. Each feature is organized as shown below.

5.4.1 Feature

This provides a brief description. See the appropriate chapter(s) in this User’s Guide for more information about any feature.

This shows you the sequence of menu items and tabs you should click to find

MENU ITEM(S) the main screen(s) for this feature. See the web help or the related User’s Guide chapter for information about each screen.

114

 

ZyWALL USG 1000 User’s Guide