Chapter 4 Wizard Setup

Type the Password associated with the user name.

Select Nailed-Upif you do not want the connection to time out. Otherwise, type the Idle Timeout in seconds that elapses before the router automatically disconnects from the PPTP server.

4.3.9.2 PPTP Configuration

Base Interface: This is the identity of the Ethernet interface you configure to connect with a modem or router.

Type a Base IP Address (static) assigned to you by your ISP. Type the IP Subnet Mask assigned to you by your ISP (if given). Server IP: Type the IP address of the PPTP server.

Type a Connection ID or connection name. It must follow the “c:id” and “n:name” format. For example, C:12 or N:My ISP. This field is optional and depends on the requirements of your broadband modem or router.

4.3.9.3 WAN IP Address Assignments

You do not configure this section if you selected Auto as the IP Address Assignment in the previous screen.

WAN Interface: This is the connection type on the interface you are configuring to connect with your ISP.

Zone: This is the security zone to which this interface and Internet connection will belong.

IP Address: Enter your (static) public IP address.

DNS Server: The Domain Name System (DNS) maps a domain name to an IP address and vice versa. Enter a DNS server's IP address(es). The ZyWALL uses these (in the order you specify here) to resolve domain names for VPN, DDNS and the time server.

The ZyWALL applies the configuration settings.

Figure 27 PPTP Encapsulation: Static: Finish

90

 

ZyWALL USG 1000 User’s Guide