Agilent Technologies 8935 series e6380a Any unintended operation, Intact only, Remove covers

General Information

Manufacturer's Declaration

Safety Considerations for this Instrument

WARNING	Whenever it is likely that the protection has been impaired, the
	instrument must be made inoperative and be secured against
	any unintended operation.
	If this instrument is to be energized via an autotransformer (for
	voltage reduction), make sure the common terminal is
	connected to the earth terminal of the power source.
	If this product is not used as specified, the protection provided
	by the equipment could be impaired. This product must be used
	in a normal condition (in which all means for protection are
	intact) only.
	No operator serviceable parts in this product. Refer servicing
	to qualified personnel.To prevent electrical shock, do not
	remove covers.
	Servicing instructions are for use by qualified personnel only.
	To avoid electrical shock, do not perform any servicing unless
	you are qualified to do so.
	The opening of covers or removal of parts is likely to expose
	dangerous voltages. Disconnect the product from all voltage
	sources while it is being opened.
	Adjustments described in the manual are performed with
	power supplied to the instrument while protective covers are
	removed. Energy available at many points may, if contacted,
	result in personal injury.
	For Continued protection against fire hazard, replace the line
	fuse(s) with T 250 V 5.0 A fuse(s) or the same current rating and
	type. Do not use repaired fuses or short circuited fuseholders.

16 Chapter 1

C:\Spk\Ref\RefGuideRevE\Preface.fm