Agilent Technologies 8935 series e6380a manual Loading and Running RF Tools, Software Menu Screen

Overview of theTest Set’s Built-In Tools

Using the RF Tools Program

Loading and Running RF Tools

1.Press the MENU key to display the SOFTWARE MENU screen (shown below).

Figure 4-1 SOFTWARE MENU Screen

Choices:

Card

ROM

RAM

Choices:

RFTOOLS

2.Position the cursor at the highlighted area under Select Procedure Location and push the knob to select it. A Choices menu appears.

3.Position the cursor at ROM and select it.

4.Position the cursor at the highlighted area under Select Procedure Filename and select it. A Choices menu appears.

5.Position the cursor at RFTOOLS and select it.

6.Press k1 (Run Test). The software is now loading. Wait for the RF Tools Main Menu screen (Figure 4-2).

7.Select an item from the menu.

Figure 4-2 RF Tools Main Menu Screen

80 Chapter 4

C:\Spk\Ref\RefGuideRevE\Tools.fm