Agilent Technologies 8935 series e6380a manual Time Offset, Time Ofs

CDMA Measurements - Screens and Control Fields

Control Fields for CDMA Measurements

Time Offset

This field allows you to manually enter a time offset.To obtain a value to enter in this field you must make at least one of the following measurements.

•Power

•Timing

•Phase

•Rho

After making the measurement, access the FP Setup menu on the CODE DOM screen, and enter the value obtained from the Time Ofs field or, for rho measurements, the Time Offset measurement field on the CDMA ANALYZER screen.

An entry into the Time Offset field can also be made automatically, using the Ofs Trnsfer field. See “Ofs Trnsfer” on page 164.

When measuring fast power, the code domain analyzer uses the value in the Time Offset field instead of re-measuring the time offset parameters each time a code domain measurement is made.

Screens on which this field is present

CODE DOM (Code Domain Analyzer, IS-95 only): FP setup controls menu

Time Ofs

This measurement field displays the time offset when a rho measurement is made. See “Time Offset” on page 135 for more information about this measurement.

Screens on which this field is present

CODE DOM (Code Domain Analyzer).

Chapter 5 173