Agilent Technologies 8935 series e6380a manual Displaying Measurement Results on a Meter Scale

Operating Overview

Displaying Measurement Results on a Meter Scale

Displaying Measurement Results on a Meter Scale

Figure 3-8 Displaying the Meter Scale

Unit-of -Measure

Fields

Meters:

On/Off

Lo End

Hi End

Intervals

Measurement results can be displayed on a meter scale. The digital numeric value is still displayed (but smaller) under the meter scale.

To display the meter scale

1.Move the cursor to the unit-of-measure field for the measurement you want displayed on the meter.

2.Press and release the blue Shift key, then the Incr Set key to access the meter function.

3.Select On/Off from the Meters: menu (or press the On/Off key).

To set the meter’s end points and scale intervals

1.Use the knob to select the unit-of-measure field for the measurement you want displayed on the meter.

2.Press and release the blue Shift key, then the Incr Set key to access the meter function.

3.Select Hi End, Lo End, or Interval from the Meters: menu and enter the value for your selection, then press the Enter key.

4.Repeat steps 2 and 3 until you have set the desired parameters for the meter’s scale.

Chapter 3 59