Chapter 11: RADIUS Authentication Protocol
7.Enter the encryption key of the RADIUS server.
8.Type R to select Set Response Time. The following prompt is displayed:
Enter response time>
9.Enter the amount of time in seconds the switch should wait for a response from the RADIUS server. The range is 1 to 120 seconds. The default is 10 seconds.
10.Type M to select Max Retransmission. The following prompt is displayed:
Enter maximum retransmissions>
11.Enter the number of times the switch should retransmit to the RADIUS server in the event the server does not respond. The range is 1 to 254. The default is 3.
12.Type Q to select Quit to previous menu and save your changes.
144 | Section I: Using the Menus Interface |
