2.From the Basic Switch Configuration Menu, type I to select System IP Configuration.
The System IP Configuration Menu is shown in Figure 5.
Basic Switch Configuration
MAC Address: 00:06:5H:B2:65:84
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Gateway: 0.0.0.0
DHCP Mode: Disabled
Set [I]P Address
Set Subnet [M]ask
Set Default [G]ateway Enable/Disable [D]HCP Mode [Q]uit to previous menu
Command>
Figure 5. System IP Configuration Menu
The top portion of the menu displays the current IP address, subnet mask, and gateway address for the switch. The menu also displays the switch’s MAC address. The MAC address cannot be changed. The menu also displays the current status of the DHCP client on the switch.
The Enable/Disable DHCP Mode option is described in “Enabling and Disabling the DHCP Client” on page 33.
3.To set the switch’s IP address, do the following:
a.Type I to select Set IP Address. The following prompt is displayed:
Enter new IP address>
b.Type the IP address for the switch and press Enter.
4.To set the switch’s subnet mask, do the following:
a.Type M to select Set Subnet Mask. The following prompt is displayed:
Enter new subnet mask>
Section I: Using the Menus Interface | 31 |
