Chapter 21: Rapid Spanning Tree Protocol (RSTP)
Configuring the
Advanced RSTP
Port Settings
Path cost is described in “Path Costs and Port Costs” on page 109.
5.Click Apply.
6.To configure all of the ports to the same settings, in the All row, configure one, two, or all of the following settings: STP Status, Priority, and Path Cost. Click Apply.
To configure the advanced RSTP port settings, perform the following procedure:
1.From the Basic Config menu, select Rapid Spanning Tree and then RSTP Adv. Port Config.
The RSTP Advanced Port Configuration page is shown in Figure 65.
Figure 65. RSTP Advanced Port Configuration Page
2.In the Admin/OperEdge column for the port you want to configure, choose True or False to set whether or not the port will operate as an edge port.
220 | Section II: Web Browser Interface |
