Chapter 13: Management Software Updates
4.Type S to select Set TFTP Server IP Address. The following prompt is displayed:
Enter IP address of TFTP server:
5.Type the IP address of the TFTP server and press Enter.
6.Type F to select Set Image File Name. The following prompt is displayed:
Enter file name>
7.Enter the file name of the
8.Type R to select Set Retry Count. The following prompt is displayed:
Enter retry count>
9.Enter the number of times you want the switch to retry in the event a problem occurs during the download process. The range is 1 to 20. The default is 5 times.
10.To begin the download, type U to select Upgrade Image and Reboot. The following prompt is displayed:
Download file? (Y/N)>
11.Type Y for yes to begin the upgrade or N for no to cancel the procedure.
If you select yes, the software immediately begins to download the file onto the switch. After the software download is complete, the switch initializes the software and reboots. You will lose your local management connection to the switch during the reboot process.
154 | Section I: Using the Menus Interface |
