Chapter 3: Basic Switch Parameters

5.Type R to select Start Reboot Process. The following prompt is displayed:

Are you sure you want to reboot the system (Y/N)>

6.Type Y to start the reboot process.

The switch returns its operating parameters to the default values and begins to reload the AT-S79 management software. This process takes approximately one minute to complete. You can not manage the device during the reboot. After the reboot is finished, you can log in again if you want to continue to manage the device.

48

Section I: Using the Menus Interface

Page 48
Image 48
Allied Telesis AT-S79 manual Are you sure you want to reboot the system Y/N