b.Type a name for the switch (for example, Sales). The name is optional and can contain up to 50 characters.
Note
Allied Telesyn recommends that you assign names to the switches. Names can help you identify the switches when you manage them and can also help you avoid performing a configuration procedure on the wrong switch.
4.To enter the system’s location, do the following:
a.Type L to select Set System Location. The following prompt is displayed:
Enter system location>
b.Type information to describe the location of the switch (for instance, Third Floor). The location is optional and can contain up to 50 characters.
5.To enter the administrator’s name, do the following:
a.Type C to select Set System Contact Information. The following prompt is displayed:
Enter system contact>
b.Type the name of the network administrator responsible for managing the switch. The contact name is optional and can contain up to 50 characters.
6.Type Q to select Quit to previous menu and save your changes.
Section I: Using the Menus Interface | 35 |
