AT-S79 Management Software User’s Guide
2.Click the PVID field of the port whose value you want to change and enter the new PVID value for the port. The PVID must be equal to the VID of the VLAN where you want the port to be an untagged member.
For example, to make Port 10 an untagged member of a VLAN that has a VID of 12, you would change its PVID to 12.
Note
If you specify a PVID that does not correspond to any VIDs on the switch, the management software creates a new VLAN with a VID that equals the PVID. The VLAN is not assigned any name.
3.Click Apply.
4.Repeat steps 2 and 3 to change the PVID values of other ports.
Section II: Using the Web Browser Interface | 203 |
