AT-S80 Management Software User’s Guide

Configuring RSTP Port Settings

Configuring the

Basic RSTP Port

Settings

This section contains the following topics:

ˆ“Configuring the Basic RSTP Port Settings,” next

ˆ“Configuring the Advanced RSTP Port Settings” on page 220

To configure the basic RSTP port settings, perform the following procedure:

1.From the Basic Config menu, select Rapid Spanning Tree and then RSTP Basic Port Config.

The RSTP Basic Port Configuration page is shown in Figure 64.

Figure 64. RSTP Basic Port Configuration Page

2.In the STP Status column for the port you want to configure, select the STP status from the list, either Enable or Disable.

3.In the Priority column for the port you want to configure, type a number for the port priority.

Port priority is described in “Port Priority” on page 110.

4.In the Path Cost column for the port you want to configure, type a number for the Path Cost.

Section II: Web Browser Interface

219

Page 219
Image 219
Allied Telesis AT-S79 manual Section II Web Browser Interface 219