AT-S79 Management Software User’s Guide
Disabling Port Mirroring
To disable port mirroring, perform the following procedure:
1.From the Main Menu, type A to select Advanced Switch Configuration.
The Advanced Switch Configuration Menu is shown in Figure 14 on page 59.
2.From the Advanced Switch Configuration Menu, type M to select Port Mirroring Configuration.
The Port Mirroring Menu is shown in Figure 16 on page 67.
3.Type E to select Enable/Disable Port Mirroring. The following prompt is displayed:
Enable or Disable monitoring (E/D)>
4.Type D to disable port mirroring.
The port that was functioning as the mirroring port can now be used as a normal networking port.
5.Type Q to select Quit to previous menu and save your changes.
Section I: Using the Menus Interface | 69 |
