AT-S79 Management Software User’s Guide
Configuring Broadcast Storm Control
To configure the broadcast storm control feature, perform the following procedure:
1.From the Main Menu, type B to select Basic Switch Configuration. The Basic Switch Configuration Menu is shown in Figure 4 on page 30.
2.From the Basic Switch Configuration Menu, type C to select Storm Control Configuration.
The Storm Control Configuration Menu is shown in Figure 38.
Basic Switch Configuration
Threshold : Low
Set [B]roadcast Status Set [T]hreshold [Q]uit to previous menu
Command>
Figure 38. Storm Control Configuration Menu
3.Type B to select Broadcast Storm Status. The following prompt is displayed:
Enable or Disable broadcast storm control (E/D)>
4.Type E to enable broadcast storm control or D to disable broadcast storm control.
5.If you are activating the feature, type T to select Threshold. The following prompt is displayed:
Enter threshold level>
6.Specify the broadcast threshold. Choices are:
H for High (3000 broadcast packets per second)
M for Medium (500 broadcast packets per second)
Section I: Using the Menus Interface | 149 |
