Chapter 7: Virtual LANs
The following prompt is displayed:
Enter port number >
9.Enter the untagged and tagged ports of the VLAN.
You can specify the ports individually separated by commas, for example, 2,7,15, as a range of ports separated by a hyphen, for example,
10.When the VLAN is complete, type A to select Apply and apply the VLAN settings.
The VLAN Management Menu is displayed again with information about the VLAN you just created. The VLAN is now active on the switch.
11.If the VLAN contains untagged ports, perform the next procedure, “Configuring the PVID of Untagged Ports” on page 87, to change the PVID of the untagged ports to match the virtual LAN’s VID.
86 | Section I: Using the Menus Interface |