Chapter 10: 802.1x
Supplicant Timeout.
Sets the
Server Timeout.
Sets the timer used by the switch to determine authentication server timeout conditions. The default value for this parameter is 10 seconds. The range is 1 to 60 seconds.
Maximum Request.
Sets the maximum number of times that the switch retransmits an EAP Request packet to the client before it times out the authentication session. The default value for this parameter is 2 retransmissions. The range is 1 to 10 retransmissions.
Quiet Period.
Sets the number of seconds that the port remains in the quiet state following a failed authentication exchange with the client. The default value is 60 seconds. The range is 0 to 65,535 seconds.
Re-auth Period.
Specifies the time period between periodic reauthentication of the client. The default value is 3600 seconds. The range is 1 to 65,535 seconds.
Re-auth Status.
Specifies if reauthentication should occur according to the reauthentication period. The options are Enabled or Disabled.
6.If the port control setting is Auto and you want to return the EAPOL machine state on the port to the initialized state, do the following:
a.Type I to select Initialize.
The following prompt is displayed:
Would you initialize authenticator? (Y/N)>
b.Typing Y returns the EAPOL machine state on the port to the initialize state. Typing N cancels the step.
7.If the port control setting is Auto and you want the node connected to the port to reauthenticate with the RADIUS server, do the following:
a.Type R to select
Initialize
138 | Section I: Using the Menus Interface |
