Allied Telesis AT-S79 manual Rebooting the Switch

Chapter 3: Basic Switch Parameters

Rebooting the Switch

This procedure reboots the switch and reloads the AT-S79 management software from flash memory. You might reboot the device if you believe it is experiencing a problem. Rebooting the device does not change any of the device’s parameter settings.

Caution

The switch does not forward network traffic during the reboot process. Some network traffic may be lost.

To reboot the switch, perform the following procedure:

1.From the Main Menu type T to select Switch Tools.

The Switch Tools Configuration Menu is shown in Figure 9.

AT-GS950/16 Local Management System

Main Menu -> Switch Tools Configuration Menu

Software [U]pgrade...

System [R]eboot

[P]ing Execution

[Q]uit to previous menu

Command>

Figure 9. Switch Tools Configuration Menu

2.From the Switch Tools Configuration Menu, type R to select System Reboot.

42 Section I: Using the Menus Interface