Bosch Appliances ICP-CC404 manual Four-Channel Remote Radio Hand- Held Transmitter Operations

ICP-CC404 Installation Guide 5.0 Remote Radio Transmitter Operations

If horn speaker indication beeps are enabled, one two-tone beep sounds from the horn speaker. If strobe indications are enabled, the strobe flashes for 6 sec to indicate the system is armed.

5.4.4Disarming from STAY Mode 1

Press and hold either the black or green button for 2 sec.

Two beeps sound on the remote codepad and the STAY indicator is extinguished.

If horn speaker indication beeps are enabled, one beep sounds from the horn speaker. If strobe indications are enabled, the strobe flashes for 3 sec to indicate the system is disarmed.

5.4.5Panic Alarm

Press and hold both the black and green buttons together for 2 sec.

An audible Panic Alarm is initiated that activates the horn speaker, strobe, and internal sirens.

If Option 1 is selected in Location 425 (refer to Section 18.2 System Options 2 on page 73), the remote radio Panic Alarm is also silent.

5.5Four-Channel Remote Radio Hand- Held Transmitter Operations

Because all operations using the four-channel remote radio hand-held transmitter are fixed after the control panel learns the hand-held transmitter’s code, no programming is required for the transmitter buttons. You can use the DOOR and AUX buttons on the transmitter to operate the control panel’s programmable outputs (garage door or outside lights, for example).

Figure 5: RE013/E: 4-Channel Keyfob Transmitter

1

3

2

4

1 – Button 1: Arm or disarm in AWAY Mode

2 – Button 2: Arm or disarm in STAY Mode

3 – Buttons 1 and 2: Press both buttons at the same time to activate Panic alarm.

4 – Buttons 3 and 4: Your security company can program these buttons for optional operation, such as operating a garage door.

5.5.1Arming in AWAY Mode

Press and hold [AWAY] for 2 sec.

Two beeps sound on the remote codepad and the AWAY indicator lights. Exit Time starts.

If horn speaker indication beeps are enabled, two beeps sound from the horn speaker. If strobe indications are enabled, the strobe flashes for 6 sec to indicate the system is armed.

5.5.2Disarming from AWAY Mode

Press and hold either [AWAY] or [STAY] for 2 sec. Two beeps sound on the remote codepad and the AWAY indicator is extinguished.

If horn speaker indication beeps are enabled, one beep sounds from the horn speaker. If strobe indications are enabled, the strobe flashes for 3 sec to indicate the system is disarmed.

5.5.3Arming in STAY Mode 1

Press and hold STAY for 2 sec.

Two beeps sound on the remote codepad and the STAY indicator lights. Exit Time starts.

If horn speaker indication beeps are enabled, one two-tone beep sounds from the horn speaker. If strobe indications are enabled, the strobe flashes for 6 sec to indicate the system is armed.

5.5.4Disarming from STAY Mode 1

Press and hold [AWAY] or [STAY] for 2 sec. Two beeps sound on the remote codepad and the STAY indicator is extinguished.

26 Bosch Security Systems, Inc. 12/08 F01U089401-02