
Contents |
| |
1.0 | Introduction | 7 |
1.1 | Features | 7 |
1.2 | Quick Start | 7 |
1.2.1 | Setting the Date and Time | 8 |
1.2.2 | Zone Defaults | 8 |
1.2.3 | Zone Types | 8 |
2.0 | Programming | 9 |
2.1 | Programming with the Remote Codepad | 9 |
2.2 | Programming with the Programming Key .... | 10 |
2.3 | Programming Option Bits | 10 |
2.4 | Installer’s Programming Commands | 10 |
2.4.1Command 958 – Enable/Disable Zone Status
Mode | 11 |
2.4.2Command 959 – Test the Programming Key11
2.4.3Command 960 – Exit from the Installer's
Programming Mode | 12 |
2.4.4Command 961 – Reset the Control Panel to
Factory Default Settings | 12 |
2.4.5Command 962 – Copy the Control Panel
Memory to the Programming Key | 12 |
2.4.6Command 963 – Copy the Programming
Key to the Control Panel | 12 |
2.4.7Command 964 – Erase the Programming
Key | 13 |
2.4.8Command 965 – Set Up Domestic Dialing
Format | 13 |
2.4.9Command 966 – Enable or Disable Auto
Step Mode | 13 |
2.4.10Command 999 – Display the Panel Type or
| Software Version Number | 14 |
2.5 | Disable Factory Defaults | 15 |
3.0 | Codepad Indicators | 16 |
3.1 | 16 |
3.2
4.0 | System Operations | 18 |
4.1 | Arming the System in AWAY Mode | 18 |
4.2 | Disarming the System from AWAY Mode ... | 18 |
4.3 | Arming the System in STAY Mode 1 | 19 |
4.4Disarming the System from STAY Mode 1 ..19
4.5 | Arming the System in STAY Mode 2 | 20 |
4.6Disarming the System from STAY Mode 2 ..20
4.7 | Codepad Duress Alarm | 21 |
4.8 | Codepad Panic Alarm | 21 |
4.9 | Codepad Fire Alarm | 21 |
4.10 | Codepad Medical Alarm | 21 |
4.11 | Isolating Zones | 21 |
4.11.1 | Standard Isolating | 21 |
4.11.2 | Code to Isolate | 22 |
4.12 | Fault Analysis Mode | 22 |
4.13 | Fault Descriptions | 22 |
5.0 | Remote Radio Transmitter Operations.... 24 |
5.1Indications from Remote Radio Transmitter
| Operations | 24 |
5.2 | Remote Radio User Code Priority Levels | 24 |
5.3Changing or Deleting Remote Radio User
Codes | 24 |
5.4
Transmitter Operations | 25 |
5.4.1 Arming in AWAY Mode | 25 |
5.4.2 Disarming from AWAY Mode | 25 |
5.4.3 Arming in STAY Mode 1 | 25 |
5.4.4 Disarming from STAY Mode 1 | 26 |
5.4.5 Panic Alarm | 26 |
5.5
| Transmitter Operations | 26 |
5.5.1 | Arming in AWAY Mode | 26 |
5.5.2 | Disarming from AWAY Mode | 26 |
5.5.3 | Arming in STAY Mode 1 | 26 |
5.5.4 | Disarming from STAY Mode 1 | 26 |
5.5.5 | Panic Alarm | 27 |
5.5.6 | Remote Outputs | 27 |
6.0 | System Functions | 27 |
6.1 | Installer Code Functions | 27 |
6.1.1Set the Number of Days until the First Test
Report | 27 |
6.1.2 Changing Domestic Phone Numbers | 28 |
6.1.3Change Telco Arming or Disarming
| Sequence | 28 |
6.1.4 | Setting STAY Mode 2 Zones | 30 |
6.1.5 | Satellite Siren Service Mode | 30 |
6.1.6Turning Telephone Monitor Mode On and
| Off | 31 |
6.1.7 | Walk Test Mode | 31 |
6.1.8 | Event Memory Recall Mode | 31 |
6.2 | Master Code Functions | 31 |
6.2.1 | Changing and Deleting User Codes | 32 |
6.2.2Changing and Deleting Remote Radio User
Codes | 32 |
6.2.3 Changing Domestic Phone Numbers | 33 |
6.2.4Change Telco Arming or Disarming
| Sequence | 34 |
6.2.5 | Setting STAY Mode 2 Zones | 35 |
6.2.6 | Turning Outputs On/Off | 36 |
6.2.7 | Setting the Date and Time | 36 |
6.2.8 | Walk Test Mode | 36 |
6.2.9 | Event Memory Recall Mode | 36 |
6.3 | 37 | |
6.3.1 | Arming the System in AWAY Mode | 37 |
6.3.2 | Arming the System in STAY Mode 1 | 37 |
6.3.3 | Arming the System in STAY Mode 2 | 37 |
6.3.4 | Horn Speaker Test | 37 |
Bosch Security Systems, Inc. 12/08 | 3 |