Table 36: 4+2 Express Transmission Code Descriptions
Code | Description |
SSSS | Subscriber ID Number |
AAlarm
CH | Channel Number |
0Zero
TTrouble
BBypass
EAC Fail Code 1st digit
AC | AC Fail Code 2nd digit |
LLow Battery Code 1st digit
LB | Low Battery Code 2nd digit |
OOpen
CClose
UUser Number
RAlarm Restore Code
TR | Trouble Restore Code |
BR | Bypass Restore Code |
ER | AC Fail Restore Code 1st digit |
ACR | AC Fail Restore Code 2nd digit |
LR | Low Battery Restore Code 1st digit |
LBR | Low Battery Restore Code 2nd digit |
DDuress Code 1st digit
D | 0 | Duress Code 2nd digit |
PPanic Code 1st digit
PCH | Panic Code 2nd digit |
TE | Test Code |
10.1.4 Basic Pager Reporting Format
Although Basic Pager Format requires some interpretation of the numbers that appear on the display, it can differentiate between 1000 different control panels if a number of control panels report to the one pager.
To set up Receiver 1 for basic pager reporting:
1.Program the Basic Pager’s access telephone number in Locations 000 to 015 (refer to Section 11.1 Primary Telephone Number for Receiver 1 and Receiver 2 on page 46).
2.Program the Subscriber ID Number in Locations 034 to 039 (refer to Section 11.5 Subscriber ID Number for Receiver 1 and Receiver 2 on page 47).
3.Select Pager Handshake (Option 5) in
Location 032 (refer to Section 11.3 Handshake Tone for Receiver 1 and Receiver 2 on page 47).
4.Program Basic Pager Format (Option 5) in Location 033 (refer to Section 11.4 Transmission Format for Receiver 1 and Receiver 2 on page 47).
To set up Receiver 2 for basic pager reporting:
1.Program the Basic Pager’s access telephone number in Locations 040 to 055 (refer to Section 11.1 Primary Telephone Number for Receiver 1 and Receiver 2 on page 46).
2.Program the Subscriber ID Number in Locations 074 to 079 (refer to Section 11.5 Subscriber ID Number for Receiver 1 and Receiver 2 on page 47).
3.Select Pager Handshake (Option 5) in Location 072 (refer to Section 11.3 Handshake Tone for Receiver 1 and Receiver 2 on page 47).
4.Program Basic Pager Format (Option 5) in Location 073 (refer to Section 11.4 Transmission Format for Receiver 1 and Receiver 2 on page 47).
The example in Figure 6 shows:
•Transmission from Subscriber ID Number 5678
•Zone 2 in alarm
•Zone 3 manually isolated
•The system is armed
•The Panic Zone is normal
•The AC is connected
•There is no fault condition.
44 | Bosch Security Systems, Inc. 12/08 |
