Bosch Appliances ICP-CC404 19.7 CP5 Eight Zone LCD Codepad CP508LW, 19.8 CP105A Night Arm Station

ICP-CC404 Installation Guide 19.0 Optional Equipment

19.7CP5 Eight Zone LCD Codepad (CP508LW)

This codepad operates with the range of control panels. This codepad has a fixed icon display and provides indications for up to eight zones.

19.8CP105A Night Arm Station

The night arm station has a panic button and allows the user to arm and disarm the system in STAY Mode 1 from a bedroom or sitting room. Enable the night arm station to operate with the system by selecting Option 8 in Location 427 (refer to Section 18.4 System Options 4 on page 74).

19.9PS101 Power Supply Module

The PS101 Power Supply Module provides 13.8 VDC at currents up to 1 A. Use the module with the TF008 18 VAC plug pack.

The module provides standard, fully short-circuit proof, power out, and battery charging terminals, and a DC LED indicator. If the application requires an uninterruptible power supply, a rechargeable sealed lead-acid battery can be installed. If there is a mains failure, the power supply switches to battery power without interrupting the supply to the load.

19.10 TF008 Plug Pack (TF008)

The TF008 plug pack is used with control panels. The plug pack includes built-in thermal fuses that blow during overload or fault conditions to eliminate a possible fire threat due to excessive heat buildup inside the casing.

The plug pack incorporates a three-wire flying lead that enables a mains earth connection between the equipment and the plug pack. This connection might be required for lightning protection on equipment connected to phone lines or for safety reasons such as earthing of metal enclosures.

Bosch Security Systems, Inc. 12/08 F01U089401-02 77