Brother MFC-8840DN manual Sending an Internet Fax, Manually Entering Text

Sending an Internet Fax

Sending an Internet Fax is the same as sending a normal Fax. If you have already programmed the addresses of the Internet Fax receivers into the MFC as Speed-Dial locations, you can send the Internet Fax by loading the document into the MFC, use the Fax Resolution key to set the preferred resolution and select a Speed- Dial number and pressing Start.

This will differ depending on the whether your MFC contains Speed-Dial keys or includes Navigator Keys.

If you wish to manually enter the Internet Fax Address load the document into the MFC and press Shift and 1 simultaneously to change into the “alphabet” dialling mode.

To manually enter the Internet Fax address, see Manually Entering Text on this page..

Internet Fax specification does not support color resolutions and files types.

Manually Entering Text

Press Shift and 1 simultaneously to change into the “alphabet” dialling mode.

You can now use the Dial Pad to dial the E-mail address. Refer to the following table: Most number keys have three or four letters printed above them. The keys for 0, #, * don’t have printed letters because they are used for special characters.

INTERNET FAX (MFC ONLY) 12 - 3