<For Windows® 95/98/Me users>

15Select the desired model of the remote printer (for example, Brother HL-series). If necessary, click Have Disk to load the driver from the CD-ROM. Click Next when you are done.

16If you have selected a printer driver that is already being used, you have the option of either keeping the existing driver (recommended) or replacing it. Select the desired option and press Next.

17Select the Brother Internet port (BIP...) which you selected in step 6 and press Next.

<For Windows NT® 4.0 and Windows® 2000/XP users>

15Select the Brother Internet port (BIP...) which you selected in step 6 and press Next.

16Select the desired model of the remote printer (for example, Brother HL-series). If necessary, click Have Disk to load the driver from the CD-ROM. Click Next when you are done.

17If you have selected a printer driver that is already being used, you have the option of either keeping the existing driver (recommended) or replacing it. Select the desired option and press Next.

18Enter any desired name for the BIP remote printer and press Next. Note that this name does not need to match the port name that you assigned in step 6, or E-mail address that you assigned in step 9.

19Select No when asked if you want to print a test page, unless you have already configured the remote Print/Fax server to receive BIP print jobs.

You have now finished installing the BIP software. If you need to configure another remote Print/Fax server, go to the next section, “Adding a Second Brother Internet Port”.

CONFIGURING INTERNET PRINTING FOR WINDOWS® 5 - 8

Page 54
Image 54
Brother MFC-8840DN manual For Windows 95/98/Me users