Gateway
This field displays the current gateway or router address used by the DCP/MFC. If you are not using DHCP or BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a gateway or router, leave this field blank. Check with your network manager if you are unsure.
1(For MFC) Press Menu, 6, 1, 4. (For DCP) Press Menu, 4, 1, 4.
2Select 1 to change. Enter the Gateway address.
3Press Set.
4Press Stop/Exit.
Host Name
You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will be the name that is registered by the WINS server on your network. Brother recommends the name BRN_XXXXXX (where XXXXXX is the last six digits of the Ethernet address) (up to 15 characters).
1(For MFC) Press Menu, 6, 1, 5. (For DCP) Press Menu, 4, 1, 5.
2Select 1 to change. Enter the Host Name.
3Press Set.
