3Click on Next.

4You must now select the correct Network printing port. Select Create a new port and select Standard TCP/IP Port port from the pull-down window.

5When you have done that click Next.

6The Add Standard TCP/IP Port Wizard will now appear. Click the Next button.

7Enter the IP address, or name of the printer you wish to configure. The Wizard will automatically enter the Port name information for you.

8Click the Next button.

9Windows® 2000/XP will now contact the printer that you specified. If you did not specify the correct IP address or name then you will receive an error message.

10Click the Finish button to complete the Wizard.

11Now that you have configured the port, you must specify which printer driver you wish to use. Select the appropriate driver from the list of supported printers. If you are using a driver supplied with the machine on CD-ROM then select the Have Disk option to browse to the CD-ROM. You can also click the Windows Update button to connect directly to Microsoft's support Web site to download printer drivers.

12When the driver is installed, click the Next button.

13Specify a name and click the Next button.

14Now specify if you wish to share the printer, enter the share name and click Next.

15Continue through the Wizard clicking the Finish button when complete.

2 - 3 TCP/IP PRINTING

Page 29
Image 29
Brother MFC-8840DN manual TCP/IP Printing