Windows NT® 4.0 Printing

Associating to the Printer

You must now create a printer on your Windows® system using the standard Windows® printer setup procedure.

1To do this, go to the Start button, select Settings and then Printers.

2Double click the Add Printer icon to get the Add Printer Wizard.

3Select My Computer (not Network Printer) and click on Next.

4Select the Brother LPR Port (the port name you assigned in step 6 of the “Installing Brother Peer to Peer Software” section in this chapter) and click on Next.

5Select the desired printer model. If the correct model is not displayed, click on the Have Disk option and insert the CD- ROM supplied with your printer.

6If the driver already exists, select Keep Existing Driver (if it does not exist, this step will be skipped), and then click on Next.

7If desired, change the name of the printer then click Next.

8If desired, make the printer shared (so other user can access it), and select the operating system(s) that these other computers will be running. Click on Next.

9Select Yes when you asked Would you like to print a test page?. Click on Finish to complete the installation. You may now print to the printer as if it were a local printer.

TCP/IP PRINTING 2 - 6

Page 32
Image 32
Brother MFC-8840DN manual Windows NT 4.0 Printing Associating to the Printer