Brother MFC-8840D manual Setup Mail TX For MFC only, Sender Subject, Press Stop/Exit Size Limit

Setup Mail TX (For MFC only)

This menu has three selections Sender Subject, Size Limit and Notification.

Sender Subject

This field displays the subject that is attached to the Internet Fax data being sent from the Brother MFC to a PC (default is “Internet Fax Job”).

1Press Menu, 6, 4, 1.

2Select 1 to change the Sender Subject—OR—2to exit.

3Enter the subject information.

4Press Set.

5Press Stop/Exit.

Size Limit

Some E-mail servers do not allow you to send large E-mail documents. The MFC may display Out of Memory when trying to send E-mail documents (the System Administrator will often place a limit on the maximum E-mail size). With this function enabled, the MFC will display Out of Memory when trying to send E-mail documents over 1Mbyte in size. The document will not be sent and an error report will be printed. The document you are sending should be separated into smaller documents that will be accepted by the mail server. (Ex. A 42 page document of the ITU-T Test Chart#1 test chart is approximately 1Mbyte in size).

1Press Menu, 6, 4, 2.

2Press or to select On or Off.

3Press Set.

4Press Stop/Exit.

FRONT PANEL SETUP MENU 10 - 15