9You will then be asked to enter the port settings for the remote Print/Fax server:

Enter any unique legal Internet E-mail address for the remote Print/Fax server (for example emailprinter@xyz.com). Note that Internet E-mail addresses cannot have spaces in them.

Enter your E-mail address and the IP address of your SMTP E-mail server (consult your network administrator if you do not know this address). Also specify if you are going to use the Partial E-mail Print option and the Notification type.

10Press OK to continue. You will then be asked to re-start your computer.

11Once your computer has re-started you must create a printer on your Windows® 95/98/Me/2000/XP and Windows NT® 4.0 system using the standard Windows® 95/98/Me/2000/XP and Windows NT® 4.0 printer setup procedure. To do this, go the Start button, select Settings and then Printers (Windows® 95/ 98/Me/2000/XP and Windows NT® 4.0). To do this, go to the

Control Panel, select Printers and Other Hardware and then Printers and Faxes (or Add a printer)(Windows® XP)

12Select Add Printer to begin the printer installation.

13Click Next when you get the Add Printer Wizard window.

<For Windows® 95/98/Me users>

14Select Local Printer when you are asked how the printers are connected to your computer and push Next.

<For Windows NT® 4.0 and Windows® 2000/XP users>

14Select Local Printer, and then delete the check mark in Plug and Play check box.

<For Windows® XP users>

14Select Local Printer attached to this computer.

5 - 7 CONFIGURING INTERNET PRINTING FOR WINDOWS®

Page 53
Image 53
Brother MFC-8840DN manual For Windows 95/98/Me users, For Windows NT 4.0 and Windows 2000/XP users, For Windows XP users