18Start the appropriate BRAdmin Professional utility, and select the correct Printer/Fax server from the list (by default, the node name is BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC address)).
19Double click the appropriate Brother Print/Fax server. You will be prompted for a password, the default password is access. Now select the NetWare tab.
20Select Queue Server as the operating mode.
The same service assigned by NetWare server name cannot be used for both queue server mode and remote printer mode.
If you want to enable queue server capabilities on services other than the default NetWare services, you must define new services that are enabled for NetWare and for the desired port. Seethe Appendix in this manual for information on how to do this.
21Enter the NDS tree name (note that a Print/Fax server can service both NDS and bindery queues).
22Type in the name of the context where the Print server resides.
23Exit the BRAdmin Professional utility making sure that you save the changes that you have made. You are now ready to print.
