Bryant 581A/B manual Base Unit Dimensions 579F240,300, 300-579F180

147

a48-7339

UNIT	STD UNIT		ECONOMIZER		CORNER		CORNER			CORNER			CORNER			DIM A		DIM B		DIM C
	WEIGHT		WEIGHT		A			B			C			D
579F
	Lb	Kg	Lb	Kg	Lb	Kg	Lb		Kg	Lb		Kg	Lb		Kg	ft-in.	mm	ft-in.	mm	ft-in.	mm
240	1850	839	90	41	443	201	406		184	476		216	525		238	3-2	965	3-5	1041	1-8	508
300	2000	907	90	41	471	214	428		194	526		239	574		260	3-2	965	3-5	1041	1-8	508

NOTES:

1.	Refer to print for roof curb accessory dimensions.
2.	Dimensions in ( ) are in millimeters.
3.	Center of Gravity.

4. Direction of airflow.

5.Ductwork to be attached to accessory roof curb only.

6.Minimum clearance:

•Rear: 7′ -0″(2134) for coil removal. This dimension can be reduced to 4′ -0″(1219) if conditions permit coil removal from the top.

•4′ -0″(1219) to combustible surfaces, all four sides (includes between units).

•Left side: 4′ -0″(1219) for proper condenser coil airflow.

•Front: 4′ -0″(1219) for control box access.

•Right side: 4′ -0″(1219) for proper operation of damper and power exhaust if so equipped.

•Top: 6′ -0″(1829) to assure proper condenser fan operation.

•Bottom: 14″ (356) to combustible surfaces (when not using curb).

•Control box side: 3′ -0″(914) to ungrounded surfaces, non-combusti- ble.

•Control box side: 3′ -6″(1067) to block or concrete walls, or other grounded surfaces.

•Local codes or jurisdiction may prevail.

7.With the exception of clearance for the condenser coil and the damper/ power exhaust as stated in Note #6, a removable fence or barricade requires no clearance.

8.Dimensions are from outside of corner post. Allow 0′ -5/16″(8) on each side for top cover drip edge.

9.See drawing 50TJ500353 for service option details.

BASE UNIT DIMENSIONS — 579F240,300

300-579F180