Bryant 581A/B manual 246

ELECTRICAL DATA — 581A (cont)

ELECTRICAL DATA — 581A210-300 WITH OPTIONAL CONVENIENCE OUTLET

	NOMINAL	VOLTAGE				COMPRESSOR						OFM			IFM			POWER			COMBUSTION	POWER SUPPLY			DISCONNECT
UNIT	VOLTAGE	RANGE		No. 1			No. 2		No. 3								EXHAUST				FAN MOTOR				SIZE
581A	(3 Ph,	Min	Max	RLA	LRA		RLA	LRA	RLA	LRA	Qty	Hp	FLA	Hp	FLA		Qty		Hp	FLA	FLA	MCA		MOCP*	FLA
	60 Hz)												(ea)							(ea)
														3.7	10.6/	9.6	—		—	—		83/ 82		100/100	89/ 88
																	2		1	5.9		95/	94	100/100	103/101
	208/230	187	253	16.7	130		16.7	130	22.4	184	4	0.25	1.5	5	16.7/15.2		—		—	—	0.5	89/ 88		100/100	96/ 94
																	2		1	5.9		101/	99	110/100	110/108
														7.5	24.2/22		—		—	—		97/ 94		100/100	105/102
																	2		1	5.9		109/106		125/125	118/116
														3.7	4.8		—		—	—		42		50	45
																	2		1	3.1		48		50	52
210	460	414	506	9	70		9	70	10.7	90	4	0.25	0.7	5	7.6		—		—	—	0.3	45		50	48
																	2		1	3.1		51		60	56
														7.5	11		—		—	—		48		50	52
																	2		1	3.1		54		60	59
														3	3.9		—		—	—		35		40	38
																	2		1	2.4		40		45	43
	575	518	633	7	55		7	55	9.3	73	4	0.25	0.7	5	6.1		—		—	—	0.24	38		45	40
																	2		1	2.4		42		50	46
														7.5	9		—		—	—		40		45	44
																	2		1	2.4		45		50	49
														3.7	10.6/	9.6	—		—	—		94/ 93		100/100	102/101
																	2		1	5.9		106/105		125/125	116/115
														5	16.7/15.2		—		—	—		101/ 99		110/100	109/107
	208/230	187	253	22.4	184		22.4	184	22.4	184	4	0.25	1.5				2		1	5.9	0.5	112/111		125/125	123/121
														7.5	24.2/22		—		—	—		108/106		125/125	118/115
																	2		1	5.9		120/118		125/125	131/129
														10	30.8/28		—		—	—		117/113		125/125	125/122
																	2		1	5.9		129/125		150/150	139/136
														3.7	4.8		—		—	—		45		50	49
																	2		1	3.1		52		60	56
240														5	7.6		—		—	—		48		50	52
	460	414	506	10.7	90		10.7	90	10.7	90	4	0.25	0.7				2		1	3.1	0.3	54		60	59
														7.5	11		—		—	—		52		60	56
																	2		1	3.1		58		60	63
														10	14		—		—	—		55		60	60
																	2		1	3.1		62		70	67
														5	6.1		—		—	—		42		50	46
																	2		1	2.4		47		50	51
	575	518	633	9.3	73		9.3	73	9.3	73	4	0.25	0.7	7.5	9		—		—	—	0.24	45		50	49
																	2		1	2.4		50		50	55
														10	11		—		—	—		47		50	51
																	2		1	2.4		52		60	57
														5	16.7/15.2		—		—	—		137/135		175/175	144/142
																	2		1	5.9		148/147		175/175	157/155
	208/230	187	253	47.1	245		47.1	245	—	—	6	0.25	1.5	7.5	24.2/22		—		—	—	0.5	144/142		175/175	152/150
																	2		1	5.9		156/154		200/200	166/163
														10	30.8/28		—		—	—		151/148		175/175	160/157
																	2		1	5.9		163/160		200/200	173/170
														5	7.6		—		—	—		59		60	62
																	2		1	3.1		65		80	69
300	460	414	506	19.6	125		19.6	125	—	—	6	0.25	0.7	7.5	11		—		—	—	0.3	62		80	66
																	2		1	3.1		69		80	73
														10	14		—		—	—		65		80	69
																	2		1	3.1		72		90	77
														5	6.1		—		—	—		49		60	52
																	2		1	2.4		54		60	57
	575	518	633	15.8	100		15.8	100	-	-	6	0.25	0.7	7.5	9		—		—	—	0.24	52		60	55
																	2		1	2.4		57		60	60
														10	11		—		—	—		54		60	57
																	2		1	2.4		59		60	63

581A155-300

		LEGEND
FLA	—	Full Load Amps	MCA —		Minimum Circuit Amps
HACR —		Heating, Air Conditioning and	MOCP—		Maximum Overcurrent Protection
		Refrigeration	NEC	—	National Electrical Code
IFM	—	Indoor (Evaporator) Fan Motor	OFM	—	Outdoor (Condenser) Fan Motor
LRA	—	Locked Rotor Amps	RLA	—	Rated Load Amps
MCA	—	Minimum Circuit Amps

*Fuse or HACR circuit breaker.

NOTES:

Example: Supply voltage is 460-3-60.

AB = 452 v

BC = 464 v

AC = 455 v

452 + 464 + 455

Average Voltage =

3

1371

=

3

=457

Determine maximum deviation from average voltage.

(AB) 457 – 452 = 5 v (BC) 464 – 457 = 7 v (AC) 457 – 455 = 2 v

Maximum deviation is 7 v.

Determine percent of voltage imbalance.

1. In compliance with NEC requirements for multimotor and combination load equipment

% Voltage Imbalance = 100 x

7

(refer to NEC Articles 430 and 440), the overcurrent protective device for the unit shall be

fuse or HACR breaker. Canadian units may be fuse or circuit breaker.

2. Unbalanced 3-Phase Supply Voltage

Never operate a motor where a phase imbalance in supply voltage is greater than 2%.

Use the following formula to determine the percent of voltage imbalance.

% Voltage Imbalance

max voltage deviation from average voltage

= 100 x

average voltage

457

= 1.53%

This amount of phase imbalance is satisfactory as it is below the maximum allowable 2%.

IMPORTANT: If the supply voltage phase imbalance is more than 2%, contact your local electric utility company immediately.

246