Fujitsu SRS-2100 manual Appendix B, Installation

Appendix B ( SRS -2100 Installation

APPENDIX B

INSTALLATION

This appendix is intended mainly for System Administrators or service personnel with responsibility for installing the SRS-2100. End users can also install the digital set if provided with the necessary hardware and information from their System Administrator.

Installation of the SRS-2100 involves four main steps:

∙Connecting the set to the network

It’s necessary to determine the type of Telephone Company switching equipment in use for proper connection to the Telephone Company network. Implementation procedures vary from one manufacturer to another.

Switch Manufacturer

DMS-100 Nortel

5ESS Lucent

EWSD Siemens

∙Entering Service Profile Identifiers (SPIDs) and a D- channel Terminal Endpoint Identifier (TEI) for packet- switched data calls, as required

∙Loading network data. This may be accomplished by two methods: 1) downloading of features from the switch, or 2) manual configuration of multifunction buttons.

∙Programming and labeling the set

5:20 PM Tuesday January 4

UNA-LIST DATA CLEAR DIR-LIST

Service

1 2 3 4

Standard Softkey Layout

(The DATA softkey label appears only if you have a voice/data terminal.)

Note: Softkey 1 also serves as the ENTER key (for entering information as indicated in this User's Guide).

Page B-1