SRS -2100 Local Features (

Chapter 3

PRIVATE DATA CLEAR COMPLETED

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . .

ENTER NEXT CLEAR REGISTER

3.To return to normal operation, press REGISTER (softkey 4).

UNANSWERED CALL

LOGGING (UNA-LIST)

Once enabled, this feature records information about incoming calls that were not answered at this phone.

For each unanswered call (up to eight), the set records the date and time of the call plus the telephone number of the calling party. The ninth and later unanswered calls replace the first, second, and so forth, in order, so your UNA-LIST always has the most recent eight. (If the caller gets a busy signal, the call is not considered "unanswered".) If the set receives a call from a number already on the UNA -LIST, the latest call is recorded and the earlier call is dropped from the list. The set can be configured to record unanswered calls for all lines, designated lines, or no lines (Not Activated).

Some of the data entry displays have built -in timers. If you do not enter information within fifteen seconds, the display reverts to the menu for selecting the feature you were setting up. You must reselect the feature and start again.

If for any reason you become confused, you can always press REGISTER (softkey 4) to return to the menus and start over.

Enabling the UNA-LIST

Feature

To enable unanswered call logging and select the type of UNA-LIST to be used, follow these steps:

1.Press Service, then REGISTER (softkey 4), 4, ENTER (softkey 1).

If the following screen appears, the UNA-LIST feature is disabled:

UNA-LIST SERVICE MODE NON SUPPORTED

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . .

ENTER NEXT CLEAR REGISTER

To leave it as is, press REGISTER again.

Page 3-14

Page 70
Image 70
Fujitsu SRS-2100 manual Unanswered Call Logging UNA-LIST, Enabling the UNA-LIST Feature