Fujitsu SRS-2100 manual Speaker, Transfer ⎪ EWSD⎪, ONE-TOUCH Calling

SRS -2100 Voice Features ( Chapt er 2

4.Hang up the handset or, in handsfree mode, press

SPEAKER.

You are disconnected from the call, leaving the other two parties connected.

TRANSFER ⎪( EWSD⎪

Transfers a call to another phone and announces the transfer privately

Transfer is a network-based feature that you must subscribe to from your telephone company.

Note: In Siemens installations, transferring calls is accomplished without a TRANSFER button.

To transfer a call, follow these steps:

1.Answer the incoming call, then while still on the call, press

CONFERENCE.

The CONFERENCE button indicator lights up.

2.An idle CA is selected. Dial the number of the person you want to transfer the call to.

The call is put on hold and its Call Appearance indicator flashes red.

∙If the person answers, you can talk privately before completing the transfer. To place this person on hold without transferring the call, press HOLD.

∙If the line is busy or the person does not answer, press the button in the handset cradle (press SPEAKER if you are using handsfree mode). Then press the flashing Call Appearance button to return to the original call. To make this a conference call, press the CONFERENCE button and go to step 3.

3.Hang up the handset, or, in handsfree mode, press

SPEAKER.

You are disconnected from the call, leaving the other two parties connected.

ONE-TOUCH CALLING

Pressing a one-touch button causes the phone to dial the stored number just as if you were pressing the keys on the numeric keypad. (Chapter 3 explains how to set up one-touch buttons.)

Page 2-18