Fujitsu SRS-2100 manual B-18

SRS -2100 Installation ( Appendix B

TRANSFER REGISTRATION SELECT ASSIGN KEY

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . .

ENTER NEXT CLEAR REGISTER

2.Press the Multi-assign key #32 (labeled TRANSFER), and the following display is shown.

TRANSFER REGISTRATION

TRANS KEY = (32)FA=61

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . .

ENTER NEXT CLEAR REGISTER

3. Press ENTER.

TRANSFER REGISTRATION

TRANS KEY = (32)		FA=61
COMPLETED
ENTER	NEXT	CLEAR

REGISTER

Note: If the user selects a key that cannot be used for Transfer, the following display is shown:

TRANSFER REGISTRATION

SELECT ASSIGN KEY

INVALID SELECTION

ENTER NEXT CLEAR

REGISTER

Note: The SRS-2100 supports certain new capabilities of National ISDN 97/98. If you wish to assign the following features, the necessary steps are shown below. The SRS-2100 will operate using default values, if you do not make assignments.

Page B-18