Timeouts, Starting Over, Phone Operation | Fujitsu SRS-2100 manual

Fujitsu SRS -2100 (

Timeouts

When you are setting up local features as described in Chapter 3, some of the data entry displays have built -in timers. If you do not enter information within fifteen seconds, the display reverts to the menu for selecting the feature you were setting up. You must reselect the feature and start again.

Starting Over

If for any reason you become confused while setting up a local feature in menu mode, you can always press REGISTER, softkey number 4, to return to the setup menus and start over.

Phone Operation

The following two features of ISDN phones may be different from what you are used to:

Dialing 9. When you dial for an outside line (usually by pressing 9), you do not hear a pause and a second dial tone. You can begin dialing the telephone number immediately.

Onhook dialing. You can dial a number before you get a dial tone. The number you dial appears on the display and remains there for three minutes. When you lift the handset and press an idle Call Appearance button, or press the SPEAKER button for handsfree mode, the phone initiates the call automatically.

ISDN CONCEPTS: INTEGRATED VOICE AND DATA

ISDN stands for Integrated Services Digital Network, which provides many voice and communication features. (The SRS-2100 data features, available with the voice/data version are described in Chapter 4. For more information, please see the Data User's Guide.)

Page 10

Image 10

Fujitsu SRS-2100 manual Timeouts, Starting Over, Phone Operation, Isdn Concepts Integrated Voice and Data

Contents

Isdn Fujitsu SRS Fujitsu SRS Fujitsu SRS FCC Notice Preface Using this GuideChapter Content Organization Conventions and Layout UNA-LISTDATACLEAR DIR-LIST Helpful Tips About Your SRS-2100 Softkeys Phone Operation TimeoutsStarting Over Isdn Concepts Integrated Voice and Data Voice Features Data Features Multipoint Configurations Spid System Administrator Call Appearance Preference Table of Contents Changing or Canceling the Number Stored in a One-Touch Activating and DEA Ctivating the MIC-OFF Interpreting Q.931. Message Logging Codes Fujitsu SRS SRS 2100 Subject Index Subject Index SRS SRS Index Index SRS Getting Acquainted with Your Digital SET Digital Set Components SRS-2100 Front Panel Telephone Components Switches and Connectors SRS-2100 Rear View Permanent Functions IndicatorsFunction Buttons User-assigned Functions Chapter SRS -2100 Overview Multifunction Buttons Multifunction Button Layout Multiple Directory Number Appearances Example Line Assignment Call Information Displays Softkeys and Service SRS -2100 Overview Chapter Introduction to Voice Features Placing and Receiving Calls If you are usi ng handsfree mode and want to use the handset If you are already talking on another call Another call Receiving Handset CallsIf you are not talking on If you are already talking on Press Drop SRS -2100 Voice Features Chapt er Receiving Handsfree Calls Placing Headset Calls If you are not talking on another call If you are already using Headset and talking on Receiving Headset Calls Function Buttons Redial MIC-OFFDials the last number dialed on this phone SRS -2100 Voice Features Chapt er Speaker Using Redial Before Lifting the Handset or PressingUsing Redial after Lifting the Handset or Pressing Hold Telephone conferences with Setting Up a Conference CallConference Multiple participants Party added to a conference Cancels connection with lastDrop DMS -100⎪ Transfer ⎪5ESS⎪ Using Drop on a Conference CallQuestions, Details, or Alternatives Phone and announces Transfer ⎪DMS-100⎪Transfers a call to another Transfer privately Transfer ⎪ EWSD⎪ SpeakerONE-TOUCH Calling Storing a Code on a One- Touch Button Using a One Touch Button to Make a CallDialing Special Codes Using One-touch Buttons Including Codes in a One- Touch Number Unanswered Call Logging UNA-LIST Returning a Call Deleting a Record from Placing a Call UsingPersonal Directory UNA-LIST Chapter SRS -2100 Voice Features Using a One Touch Button to Make a Call Chapter SRS -2100 Voice Features Local Features Service Mode Operations SRS -2100 Local Features Chapter Selecting a Menu Option Information Programming a Button for ONE-TOUCH Dialing SRS -2100 Local Features Chapter Programming a One-Touch Button Correcting Mistakes Chapter SRS -2100 Local Features Setting CALENDAR/CLOCK Setting Calendar and Clock Values Press Enter again. The first input screen appears Enter CALENDAR/CLOCK Input Year Reinitializing the Phone Chapter SRS -2100 Local Features Enabling the UNA-LIST Feature Unanswered Call Logging UNA-LIST To enable UNA-LIST, press Enter again. This screen appears UNA-LIST on All Call Appearances UNA-LIST on Selected Call Appearances Chapter SRS -2100 Local Features Headset Mode Disabling the UNA-LIST FeatureHANDSFREE, HANDSET, and Headset Modes Chapter SRS -2100 Local Features Handset Mode Operating the Set with a Headset Switching from Headset Back to Handset Mode Switching Back to Handset Only Operation Changing Ringer Mode Setting Ringer Volume Setting Ringer Tone Press 2, Enter softkey 1 and this screen appears Selecting Ringer Mode Completed Selecting Ringer Pattern Using Q.931 Message Logging Starting or Stopping Message Logging Reviewing Logged Messages Normal ROLL-UP ROLL-DOWN Exit Call Announce Intercom Ringer Always On Call Announce Intercom on Selected Buttons Required Support from Your System Administrator Specifying the Directory Number for Intercom SRS -2100 Local Features Chapter Numbers of Call Screeners Specifying the DirectoryNON Supported TWO WAY Turned on 985*3112 Enter Next Clear Register Announcing a Call by Intercom Activating and Deactivating the MIC-OFF Button MIC Mute Mode NON Supported Enter Next Clear Register MIC-OFF Selecting Call Appearance Preference Press Enter again to display the preference menu Personal Directory SRS -2100 Local Features Chapter Setting Up the Personal Directory Using Network Data Chapter SRS -2100 Local Features Editing the Personal Directory ABC DEF GHI JKL MNO PRS TUV WXY Key Label First Second Third FourthPersonal Directory Entry Table SRS -2100 Local Features Chapter Programming a Button for ONE-TOUCH Activating and Deactivating the MIC-OFF Call Announce Intercom Call Appearance Preference Data Operation Using the Terminal AdapterUsing the Data Key Making and Terminating a Data Call SRS -2100 Data Operation Chapter Using AT Commands Using X.28 Commands Data Users Guide Using the Data Key Using IOCs Isdn Ordering Definitions CFD/CFB CNI provides the incoming calling line number if Available Package D Package E Package G Package EZ 1A Package EZCall Forwarding BUSY/DON’T Answer Appendix a SRS -2100 Isdn Ordering Age A-7 SRS -2100 Installation Appendix a Installation Appendix B Figure B-1 Power Connections Installing the SRS-2100 Figure B-2 Power Connections Entering Spids and a D Channel TEI Connecting toNetwork Spid B-5 B-6 B-7 Configuration Types Ekts and Cach Loading or Modifying Network Data after entering the Spid KEY-ATTR Configuration Download Manual Configuration Press 2, Enter to display the options for manual download Figure B-3 Multifunction Button Layout Selection 1 Call Appearance Cach Call Buttons B-12 Selection 2 Feature Activator Selection 3 Directory Number B-15 Selection 4 Intercom/Group Intercom Selection 5 Conference Selection 6 Transfer Key B-18 Selection 7 Originating DN Selection 8 Call Appearance Reservation Orgip TRMORG OFF B-22 Programming Labeling the SET Fujitsu Terminal Equipment NT1 SettingsSingle Unit Installations Termination Resistors TR Bridging at the NT1 Distance Two Unit InstallationsMultiple Unit Installations Bridging at the NT1 Maximum Subscribed Feature Assigned FA/FI SRS-2100 Button System Administrator’s ReferenceFA XX/FI Appendix B SRS -2100 Installation B-27 SRS -2100 Installation Appendix B B-28 B-29 Entering Test Mode TestingPerforming Tests For the keys LED TestKey Test This information is displayed LCD Test Tone TestMemory Tests C-4 Test Program and Loop SwitchExiting Test Mode Table C-1 Self-Test Result Codes C-6 Appendix C SRS -2100 Testing C-7 C-8 Isdn Call Identification ICI Displays Dcdl SRS -2100 Call Identification Displays Appendix D D-2 D-3 Table E-1 Connection Status MessagesBCS Circuit-Switched Error MessagesCause # Message Displayed Description Called Barred Service NGTable E-1 Connection Status Messages Bearer Type not Message Type Table E-2 Connection Status MessagesDPS Packet Switched Display format Description Table E-3 National Standardized Cause Values Call Type Incompatible with Service RequestService Operation Violated Call is Proceeding Table E-4 Network Specific Cause Values E-7 Normal Format History Mode Interpreting Q.931 Message Logging Codes F-2 Hexadecimal Format in History Mode SRS -2100 Q.931 Logging Codes Appendix F F-4 Table F-1 Message Abbreviations Codes and AbbreviationsAbbreviated message Full Message F-6 Table F-2 Information Element Codes Information element code Meaning Table F-3 Call Status Codes Code Appendix F SRS -2100 Q.931 Logging Codes F-9 F-10