Fujitsu SRS-2100 manual Programming a One-Touch Button

Chapter 3 ( SRS -2100 Local Features

The one-touch feature overview in Chapter 2 discusses these possibilities in greater detail and explains how to dial using a one- touch button.

Programming a One-Touch Button

To program a multifunction button for a one-touch number, follow these steps:

1.Press Service, then REGISTER (softkey 4), 1, ENTER (softkey

1). This screen appears:

ONE-TOUCH SELECT ASSIGN KEY

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . .

ENTER NEXT CLEAR REGISTER

The indicators for previously assigned one-touch buttons will be green.

The indicators for buttons assigned to Directory Numbers, Call Appearances, and features will be red. You cannot program the buttons with red indicators for one-touch dialing.

2.Press the unassigned button you want as your one-touch button. This screen appears:

ENTER DIRECTORY NUMBER (12)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . .

ENTER NEXT CLEAR REGISTER

The multifunction button's number is at the far right of line 1. In this example it is 12.

3.To program a standard telephone number or a special code, press the keypad digits for the number you want recorded. Include the outside access code (such as 9) and area code for long distance. The digits show on the second line:

ENTER DIRECTORY NUMBER (12)

942229876543

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . .

ENTER NEXT CLEAR REGISTER

To program a number that includes pauses and special codes, use the keypad to enter the digits and the HOLD button to enter pauses, which appear on the display as commas. The example shows a standard telephone number followed by a voice mail access code and a voice mail password.

Page 3-5