Fujitsu SRS-2100 manual Switching from Headset Back to Handset Mode

Chapter 3 ( SRS -2100 Local Features

You now can operate the SRS- 2100 using only your headset. The SPEAKER button controls picking up and hanging up calls, and the MIC-OFF button is not operational. The sounds that are usually audible through the speaker, such as the key tones, are now audible only through the headset.

Switching from Headset Back to Handset Mode

Do steps 1 through 4 in the previous section, but in step 3, press 1 instead of 2. The final screen will look like this instead:

HAND-SET/HEAD-SET SERVICE MODE CURRENT MODE IS HAND-SET

COMPLETED

ENTER NEXT CLEAR REGISTER

The MIC-OFF button (if active) controls the microphone in the handset so that you can have private conversations with others in the room and the connected party cannot hear. Depress the MIC-OFF button to resume the telephone conversation.

When the display shows the selection you prefer, press REGISTER (softkey 4) to return to the normal display.

Selecting Handsfree Operation (using the speaker and microphone)

To select handsfree operation while in handset mode, follow these steps:

1.Press REGISTER (softkey 4), 5, ENTER (softkey 1). This screen appears:

HANDS-FREE SERVICE MODE

NON SUPPORTED

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . .

ENTER NEXT CLEAR REGISTER

2.Press ENTER, and this screen appears:

SELECT ITEM (1-2)

1:SUPPORT MODE 2: NO SUPPORT MODE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . .

ENTER NEXT CLEAR REGISTER

3.Press 1. Line 2 changes to (SELECT=1).

4.Press ENTER. This screen appears:

Page 3-21