Fujitsu SRS-2100 manual Transfer ⎪DMS-100⎪, Transfers a call to another, Phone and announces

Chapter 2	( SRS -2100 Voice Features
TRANSFER ⎪(DMS-100⎪		∙ If the person answers, you
		can talk privately before
Transfers a call to another		completing the transfer. To
phone and announces the		place this person on hold
transfer privately		without transferring the call,
		press HOLD. To reconnect
Transfer is a network-based		with this person, press HOLD
feature that you must subscribe		again.
to from your telephone company.
This description assumes that		∙ If the line is busy or the
you have assigned the Transfer		person does not answer, press
feature to one of your SRS-2100		the button in the handset
function buttons.		cradle (press SPEAKER if you
		are using handsfree mode).
Note: In some installations,		Then press the flashing Call
transferring calls is		Appearance button to return
accomplished without a		to the original call.
TRANSFER button. If your set
lacks a TRANSFER button, ask		Note: A "blind" transfer is where
your System Administrator how		you do not talk to the person
to transfer a call.		you are transferring the call to.
		To perform a blind transfer, wait
To transfer a call, follow these		for the person's phone to ring,
steps:		press the TRANSFER key, and
		hang up.
1. While still on the call, press
TRANSFER.		3. You can complete the transfer
		these two ways:
The TRANSFER button indicator
lights up.		a. After announcing the transfer,
		just press TRANSFER.
The call is put on hold and its Call		or
Appearance indicator flashes red.
		b. To allow all three parties to
2. An idle CA is selected. Dial the		talk together, press the
number of the person you want		flashing Call Appearance
to transfer the call to.		button again; then press
		TRANSFER when you want
		to drop out.

Page 2-17