Fujitsu SRS-2100 manual Receiving Handset Calls, If you are not talking on, Another call

SRS -2100 Voice Features (	Chapt er 2
Receiving Handset Calls	2. Converse with the calling party.
An incoming call makes the	3. When your conversation ends,
phone ring and the Call	you have the following choices:
Appearance's LED flash green.
	∙ Hang up by replacing the
If you are not talking on	handset in its cradle. Note the
another call	displayed call duration; it
	vanishes after about three
1. Pick up the handset. (Press the	seconds.
ringing CA if necessary.) The	or
LED changes to steady red.
	∙ If you put your original call on
2. Converse with the calling party.	hold, pick up the call by
	pressing its red-flashing Call
3. When your conversation ends,	Appearance button.
hang up by replacing the	or
handset in its cradle. Note the
displayed call duration; it	∙ Press DROP. ⎪(5ESS⎪
vanishes after about three
seconds.	Note: You can turn off the
	microphone in the handset by
	pressing the MIC-OFF button;
If you are already talking on	its LED turns red. Sound will
another call	not be transmitted to the called
	party, allowing you to hold a
1. Handle the active call in one of	private conversation with others
the following ways:	in the room. To turn the
	microphone back on, press
a. End the call by pressing the	MIC-OFF again; the red LED is
button in the handset cradle.	turned off.
Then press the green-flashing
Call Appearance button to
answer the incoming call.	Placing Handsfree Calls
or	A handsfree call uses the
b. Retain the call by pressing the	integrated microphone and
green-flashing Call	speaker instead of the handset.
Appearance button to answer
the incoming call. (The first
call is automatically put on
hold.)

Page 2-4