Fujitsu SRS-2100 manual Setting Ringer Volume, Setting Ringer Tone

SRS -2100 Local Features (					Chapter 3
Setting Ringer Volume			The phone rings once at the
			selected volume. If the volume is
To set the ringer volume, follow			too loud or too soft, try a different
these steps:			option.
1. Press SERVICE, then REGISTER			5. When you hear a volume you
(softkey 4), 7, ENTER (softkey			like, press ENTER.
1). This screen appears:
			The screen shows your selection
RINGER SERVICE - SELECT ITEM (1-4)			plus the word COMPLETED:
1: RINGER VOLUME 2: RINGER TONE
3: RINGING		4: RINGER	RINGER VOLUME MODE
PATTERN			CURRENT MODE IS SOFT
ENTER	NEXT	CLEAR	COMPLETED
REGISTER			ENTER	NEXT	CLEAR
			REGISTER
2. Press 1, ENTER. A screen
appears showing you the			6. To return to the normal display,
current volume setting:			press REGISTER (softkey 4).
			To change another setting, you
RINGER VOLUME MODE
CURRENT MODE IS MEDIUM			can press asterisk (*) to return to
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .			the Service Mode options.
. . . . .
ENTER	NEXT	CLEAR	Setting Ringer Tone
REGISTER
			To set the ringer tone, follow
3. Press ENTER again and this
			these steps:
menu appears:
			1. Press SERVICE, then REGISTER
SELECT ITEM		(1-3)
			(softkey 4), 7, ENTER (softkey
1: SOFT		2: MEDIUM
			1). This screen appears:
3: HIGH
ENTER	NEXT	CLEAR
			RINGER SERVICE - SELECT ITEM (1-4)
REGISTER
			1: RINGER VOLUME 2: RINGER TONE
4. Press the number for the desired			3: RINGING		4: RINGER
			PATTERN
volume.
			ENTER	NEXT	CLEAR
			REGISTER

Page 3-24