SRS | Chapter 3 |
3.Press ENTER again and this menu appears:
SELECT ITEM | |
1: MUTE RING | 2: ONE RING |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR REGISTER
4.Select 1 for a mute ring, a normal ring pattern at reduced volume, or 2 for one ring, which rings once at normal volume. The LED for the incoming Call Appearance will continue to flash. Then press ENTER. The screen shows your selection plus the word COMPLETED:
RINGER PATTERN MODES
CURRENT MODE IS ONE RING
COMPLETED
ENTER NEXT CLEAR
REGISTER
5.To return to the normal display, press REGISTER (softkey 4).
To change another setting, you can press asterisk (*) to return to the Service Mode options.
USING Q.931 MESSAGE LOGGING
Q.931 message logging is an SRS-
2100 feature that lets you store and retrieve call control messages sent and received by your digital set. These messages can help the System Administrator or service technician verify the operation of the digital set and phone lines. The average user would use the message logging feature only to collect messages for a service person in case of phone problems.
Page
